Your mobile phone case can be a source of bacteria, so you should always keep it clean.It is no secret to anyone how easy a smartphone can get dirty. In fact, your phone can contain 10 times more germs than a toilet seat, so don’t expect your device cover to be cleaner. So in full swing and spread of the new coronavirus, in addition to other viruses and bacteria, it is better to take precautions.
That is why, below, we want to present you with a simple guide so that you learn how to clean your mobile phone case in the correct way. Of course, you should bear in mind that the procedure may change a bit depending on the material of the case you use to protect your smartphone. Let us begin!
Plastic and Silicone |Sleeves
Plastic and silicone are two of the most common materials in phone cases, but you may not be able to remove all the dirt on the first try. In any case, it is best to use dish soap, water, and a cloth or toothbrush. Now pour some dishwasher into a bowl of hot water, dip a cloth in the solution, and use it to scrub your cover. You can also use a toothbrush to reach the most difficult corners.
If the stains and grime have not yet been removed, you can sprinkle some baking soda on top of the cover and scrub with a damp toothbrush. half an hour before putting it back on your device. Avoid boiling the sleeve, as the silicone may shrink from excess heat.
Leather Cases
Leather smartphone cases are best cleaned using a mild, low-corrosive solution. Ideally, clean it lightly with a bar of mild hand soap and a damp microfiber cloth, applying the soap to the cloth and distributing it evenly over the entire surface. When drying, it is preferable to use a microfiber cloth rather than a flat-weave one. Because leather is permeable, make sure you get into all of the tiny cracks and fissures.
Of course, always make sure to be as careful as possible when cleaning and drying, rubbing in circular movements, as this will prevent the leather from stretching. Keep in mind if you use different products and solutions to clean the cover, these can alter its appearance and color, so the simpler the cleaning job, the better.
What About The Rubber Covers?
Like the silicone covers, the rubber ones can also be easily cleaned with a mixture of water and a dishwasher. To do this, soak the sleeve in a bowl of soapy water and clean the edges with a toothbrush. Then, wipe the rubber cover with a microfiber towel to remove excess water and if there are still stains, you can moisten the cloth with rubbing alcohol and clean again.
Some stains are more stubborn than others, especially on white or clear rubber covers. So if you still can’t get rid of all the dirt, try making a paste of baking soda with water, spread it over the surface of the cover, and let it dry for a few hours. Then remove the paste and rinse your case with water, and it should be enough.
So You Can Clean Your Wooden Case
Wood is the most delicate surface in mobile phone cases, so it is more important to dust and clean them more often. This will prevent oil, dirt, and dirt particles from sinking or scratching the surface. If possible, avoid water when cleaning these types of covers, as too much contact with water can deteriorate the wood. Instead, wipe it regularly with a dry microfiber cloth and avoid tissues or other clothes that can leave scratches on the wood.
If the dirt does not give way so easily, you can lightly moisten a microfiber cloth with a small amount of water and clean it as gently as possible. If it is a very sticky residue, add a few drops of white vinegar to the water and dampen the cloth in the solution. Never apply a liquid directly to the wooden case, always do it on the cloth. Finally, use a dry cloth, preferably microfiber, to absorb excess water.
Remember that whatever the material of your mobile phone case, the best remedy against dirt is prevention. So to keep things in order, clean your case with a disinfectant wipe weekly and repeat a deep cleaning once a month. And do not forget to also consult the best tricks to disinfect your smartphone.